Why should you avoid opening holes on site when installing quartz stone countertops

Why should you avoid opening holes on site when installing quartz stone countertops

The quality of kitchen decoration countertops directly affects the service life of the overall cabinet. The development of cabinet countertop materials in my country has gone from wooden countertops to natural stone countertops to stainless steel countertops. Finally, the commonly used artificial stone and quartz stone countertops have been updated for five generations after more than 30 years. Quartz stone has become the preferred surface material for cabinet countertops at present. It should be plastic, non-toxic, non-radiation, and anti-permeability of artificial stone. It also has the natural arts and hardness of natural stone. It is a new architectural decorative stone. Quartz stone is made of quartz stone. An abbreviation for the manufacturer's production of plates. As the production level of quartz stone continues to mature, some plates will add some particles to them for the sake of appearance, which will cause certain difficulties in the processing of countertops, especially now that the opening is extremely important!

The opening of the countertop can be said to be the most important thing in the processing of the countertop. If it is not well opened, it will directly affect the service life of the countertop. The Mohs hardness of the quartz stone plate can reach up to level 7. If you choose to open the hole on site, the tool used is only a hand-held cutting machine. If the cutting is improperly operated, it is prone to chipping and small cracks. In the later use, if the force is uneven Or uneven heating will cause the countertop to burst. Particle board is more likely to have the possibility of edge collapse, so try to avoid opening holes on site! And the dust from the openings on the site will flutter around, which will cause some dust to be unable to be removed!

It is inevitable and crucial to process the pot holes and stove holes for the cabinet countertops. The quality of the opening directly affects the service life of the countertop. So how to make holes? The hole should be made with a large waterjet in the processing plant. It is worth noting to avoid opening 90° right-angled holes. If the right-angled holes receive uneven force or are hit by heavy blows, they will cause the table to explode, and rounded corners should be used.孔工艺。 Hole process. If the customer requires that holes must be made on site, the dust should also be reduced, and the cutting hole should be watered and cut when cutting!