Is Quartz tiles used in floor paving?

Views:32     Author:YEYANG STONE GROUP.     Publish Time: 2020-08-27      Origin:Xiamen Yeyang Stone Group

Quartz tiles | Is Quartz tiles used in floor paving?

quartz slabs

   Quartz stone is an environmentally-friendly architectural decorative stone, and everyone is familiar with it. At present, quartz stone is widely used in cabinet countertops, test benches and window sills. It has to be said that cabinet countertops seem to be synonymous with quartz stone. Many people will say that the quartz stone is exclusive to the countertop. This is not true. Quartz stone was first applied to countertops because the production technology and capacity of domestic quartz stone manufacturers were limited, and most of them relied on imports. This led to the high price of quartz stone, so ordinary income families could only choose to apply it to cabinets with higher requirements for countertops.

quartz slabs 1

   With the improvement of the production technology and capacity of my country's quartz stone manufacturers, quartz stone has been fully used in overall home decoration. Because the water absorption rate of quartz stone is extremely low, the surface is smooth and difficult to paste. When using traditional cement mortar to bond and pave, water spots and discoloration are prone to appear if improperly handled, resulting in more hollowing, cracking, shedding, bulging, etc. than natural stone Various problems.

   There are more and more places where quartz stone is applied to the ground. In order to avoid various undesirable phenomena, the choice of materials is particularly important. The thickness of the quartz stone should be more than 20mm, and the quartz stone manufacturer should explain the ground use when purchasing, because the formula of the quartz stone floor tile is different from other application areas. The adhesive should abandon the use of traditional cement paste for paving, and special glue powder should be used. Since the surface of the quartz stone is smooth, it must be prevented from being separated from the adhesive in the later stage, and the adhesive should be brushed before paving.

quartz slabs

   1. Stir the rubber powder. The ratio of rubber powder to water should be 1 part of water and 4 parts of dry powder. The ratio of powder to water can be appropriately changed according to the construction habits to adjust the thinness. Use a low-speed (300r/min) electric stirrer to stir evenly without raw powder mass.

  2. Adhesive, the board should be applied with adhesive 2 hours before use. The adhesive must be completely transparent before use.

3. After paving and confirming that there is no water or dust on the base surface, scrape the quartz stone adhesive (strip shape/full batch scraping) with a thickness of 7mm-15mm or more, do the same on the back of the stone, with a thickness of 2-3mm, then paste the quartz stone and use Tap the rubber mallet lightly to make the newly pasted quartz stone fully adhere to the adhesive. Then correct the seam between the level and the adjacent board, and pay attention to the seam of 3mm or more between the stone.

Quartz tiles, Cheap, Brands, Sales, Suppliers, Quality, Best, Selling, Factor, Manufacturer, Purchas, Quality, Supply, Wholesale



Simple choose a support option from the icons below:​

News Letter



Get Free Decoration Design & Latest Price & Coupon,Welcome To Login To Become Our Member
') }