Artificial Quartz Stone Countertop for Bathroom and Kitchen-Yya

We specialize in manufacture Countertops, Vanity Tops, Worktops, Slabs as per client's request. We have specialists in the countertops' and vanity top's fabrication as one independent department in our factory.

Character of artificial quartz surfaces

1. Scratch resistance quartz stone is composed of 93% quartz. And quartz is the natural material that is less hard than diamond. The Ministry of Health of the hardness of quartz reaches 7. Not scratched by metal tools or any other similar object. Therefore, you can easily make the cut on the counter quartz, but without worrying about the problem of zero.

2. STAIN RESISTANCE quartz stone is free from substances like olive oil, lemon, wine, scouring the kitchen because our products are produced in the vacuum condition and its water absorption is extremely low. The surface of our stone quartz not require additional maintenance. A neutral detergent soluble in water is good enough to clean the surface.

3. LONG LIFE PRODUCTS The surface of the stone is polished quartz demand high quality. The glossy surface is free from the problems of zero, liquid stain, etc. The different tone stone surface of quartz remains shiny again after a long time use.

4. HEAT TEST RISISTANCE Comprising 93% natural quartz, stone quartz provides a higher level of heat resistance compared to most man-made stone surfaces.

5. Environmentally quartz The stone is composed of natural quartz. And the surface of our products is non-porous, scratch resistant and highly resistant to stains. Has no way to retain dirt and bacteria. You save enough to make the food in our products.

2) Size: Vanity top: 25"X22", 31"X22", 37"X22", 49"X22", 61"X22"
Kitchen top: 25.5"X96", 26"X96", 25.5"X108", 26.5"X108", 28"X96", 28"X108"
Kitchen island: 96"X36", 76"X36", 98"X42", 76"X42", 86"X42"
Contertop snack bar: 12"X78", 15"X78", 98"X18", 108"X18" etc.
We can do by per customer's design and size request;

3) Manufacturing processes
Begins with high quality raw materials carefully inspected and to minimize any potential for flaws in the finished product
Continuing with a controlled mix with polyester resin and pigments
The mix is carefully processed through our production press using vacuum, compression and low heat
Producing flat, dimensionally, consistently, very strong, non-porous slabs
The slabs are finely polished to enhance the natural beauty of the stone and provide a consistently smooth, practically flaw free stone surface

4) Edge Finish: Eased, bullnose, laminated bullnose, ogee edge, radius bevel top etc.

5) Quartz stone Application:
Widely be used for kitchen, bathroom, dining table, wall cladding, tiles etc.
Home application: Countertop, vanity top, wall, table, floor, etc.
Commercial application: Reception counter, windowsill, work counter for the fast food, table for the bar, floor, steps etc.

6) Package: By fumigated wooden crates

Other countertops we supply:

A. Cutting and Polishing: We have a particular cutting workshop, and processing workshops. When producing the countertops. Our strictly quality control make sure the surface will be flat, smooth, high gloss! Our workers will never ever neglect any of the process!

B. Color Match: Before packing, we put every piece of the counter tops on the ground, and match the color! We label the number on the back the pieces, and our customers can find the pieces from same set very easily!

C. Quality Inspect: Before send to customer, we inspect the countertops piece by piece, and look through the polished side, the finished edges, the colors, the flatness, the position of sidesplash & backsplash, the position of basin cut-out & faucet holes, pin holes on back and any other details. And we will only pack up the counter tops without any flaw!

Our skillful workers follows strict quality control from the very beginning to final delivery.